Cortex by JobDox, Complete Platform Guide

Everything You Need
to Run Cortex

A complete reference for every feature, tool, and setting in your platform. It covers first-time setup through advanced daily operations. Use the sidebar to jump to any section.

9 Setup Steps 8 Platform Sections 40+ Features Documented 7 AI-Native Tools jobdox.ai
Part 1

Getting Started

Complete these nine steps in order before using the platform with your team. Each step builds on the one before it. Skipping ahead will cause features to appear incomplete or broken.

Step 1. Explore Advanced Tools & Navigation

All Staff · ~5 minutes · Start Here
Before configuring anything, get familiar with how the platform is laid out. The left navigation rail is your primary menu. It runs vertically on the left edge of the screen and holds icon buttons for every major area. Hover over any icon to see its label. On mobile, the rail moves to the bottom of the screen as a tab bar.
Find it:Left edge of screen · always visible
1
Log in at jobdox.ai
Use the Owner credentials created during sign-up. You'll land on the Portfolio (project list) view.
2
Click the Advanced Tools icon in the rail
This is the wrench icon near the bottom. A slide-out panel shows links to every specialized tool in the platform. Browse through it. You'll use many of these as you grow.
3
Click through each main section
Try Portfolio, My Day, Messages, and Dispatch. Don't change anything. Just get your bearings. This is where your team will spend their days.

Step 2. Fill Out General Settings

Level 80+ · ~10 minutes · Most Important Step
General Settings is where you configure everything that identifies your company. This information flows into invoices, documents, client-facing portals, and every AI-generated communication. Get it right once here and it populates everywhere automatically.
Find it:Advanced Tools → Config → Account → Company → Company Info
Company Name
Appears on all invoices & documents
Phone
Used for SMS and client contact
Address
With Suite / Building #, City, State and ZIP. Drives mapping and office assignment
Primary Vertical
Tailors AI responses to your trade
Company Logo
Appears on documents and reports. An office logo overrides it
Default Tax Rate
Set under Scope & Invoicing. Overhead % and Profit % are set per work type
Don't skip this. If your company name or address is missing, invoices, reports, and the customer portal will look incomplete when sent to clients or adjusters.
Also configure in General Settings:
W

Work Types

The service lines you perform, such as Water Mitigation, Fire & Smoke, or Mold Remediation. Each gets a name and color. Mark ones that need CortexAI workflows built.
S

Work Type Statuses

Project lifecycle stages (New Lead, Active, Completed, etc.). Each can have a color and an auto-trigger keyword. When a task with that keyword is completed, the project status advances automatically.
P

Project Types

The loss/job categories that appear in the New Project dropdown, such as Water Damage, Fire & Smoke, or Storm Damage.
B

Budget Categories

Reusable cost categories for tracking, such as Labor, Materials, Equipment, or Subcontractors. Applied to projects in the Budget tab. Color-code each for visual clarity.
L

Pinned Line Items

Pre-configured scope items that appear as quick-add suggestions per work type when building invoices. Set up your most common line items here to save time on every job.

Step 3. Set Up Offices

Level 80+ · ~5 minutes
Offices represent your physical locations or service territories. Even if you only have one location, you must create at least one office record. Offices control how projects are auto-assigned, how staff are grouped, and where review request links point.
Find it:Settings → Offices tab
1
Click "Add Office" and fill in your primary location
Name it something clear (e.g., "Oklahoma City HQ" or "Main Office"). Enter the full address.
2
Click "Geocode Address" after saving
This converts the address to GPS coordinates so the system can automatically assign new projects to the nearest office based on the job site address.
3
Paste your Google Business review URL
This is the link used when sending review requests to clients. Find it in your Google Business Profile dashboard.
4
Repeat for additional locations
Add branches or territories as needed. Staff members are then assigned to their home office in the Staff tab.

Step 4. Invite Staff & Assign Permissions

Level 80+ · ~10 minutes
Add your team and give each person a role. Every role carries a permission level on a 0 to 100 scale, and that level decides what the person can see and do. Cortex ships eleven preset roles at even steps of ten. Set this up correctly now to avoid access issues after launch.
Find it:Settings → Staff tab
LevelRoleWhat They Can Access
100AdminEverything, including Account, billing, API keys, phone setup and editing roles
90DirectorPayroll including pay-rate editing, staff management, all reports
80Sr. ManagerSettings and Account, payroll view, API keys, offices
70ManagerScope/Invoice, billing rates in Shift Reports, Business Relationships, time-off approval
60Project LeadAll projects, Budget, Reports, Dispatch, Financial Dashboard
50CoordinatorAll projects, Budget, Reports, Dispatch, price lists, creating projects
40Senior TechTheir office's projects, plus generating the Project Report
30TechnicianTheir office's projects, and tasks on any project they can open
20Field IIAssigned projects only, plus editing Cortex Dry and Cortex Inventory
10Field IAssigned projects only
0Vendor / SubcontractorMy Day with assigned tasks only. No project details or internal data.
These are the shipped defaults. An Admin can change what any level unlocks, and add roles between the presets, under Settings, Access & Features, Roles & Access. Levels are also reported internally as a coarse 0 to 10 tier, which is level divided by ten, so level 50 is tier 5.
Tip: Each staff member needs a "Job Role / Title for CortexAI" field set (e.g., Project Manager, Field Technician, Estimator). CortexAI uses this to suggest automatic task assignments when building workflows.

Step 5. Configure Project Types & Work Types

Level 80+ · ~8 minutes · Required Before CortexAI
Project Types and Work Types tell the platform what kind of work you do. They power the AI workflows, budget categories, scope macros, and portfolio filters. Configure them now. CortexAI cannot generate accurate workflows until they exist.
Find it:Settings → Projects → Work Types, and Settings → Projects → Project Types
PT

Project Types = the big loss categories

Water Damage, Fire & Smoke, Mold Remediation, Storm Damage, Biohazard, Reconstruction. These appear in the New Project dropdown and portfolio filters.
WT

Work Types = the service phases within a project

Water Mitigation, Structural Drying, Demo, Reconstruction, Pack-Out. Choose a color for each. These colors appear on project cards and reports.
Why this matters for AI: In Step 7, CortexAI will use your Work Types to generate complete, phase-by-phase task workflows. The more accurately you configure them here, the more useful the AI output will be.

Step 6. Set Up Phone & Calls

Level 80+ · ~8 minutes · Required for SMS & Calls
Cortex includes a complete phone system powered by Twilio. Your dedicated number handles both inbound calls and all SMS messaging across the platform. Without this step, text messages and click-to-call features will not work.
Find it:Settings → Communications → Phones
1

Default Twilio Phone Number

Enter your dedicated Twilio number. This number is used for all inbound and outbound calls, plus every SMS sent from the platform.
2

Call Groups

Create groups of staff who ring simultaneously when a call comes in (e.g., "Business Hours Team"). Set one group as active. Staff must have a phone number on their profile to be included.
3

Greeting message

A message read aloud to callers before they connect. Many states require one for call recording compliance.
AI

Enable Automatic Call Transcription

When enabled, completed calls are automatically transcribed. The AI extracts the caller's name, phone, address, and damage type, and can automatically create a new project if the caller is not already in the system. Uses Cortex Coins.
Requires: A Twilio account with Account SID and Auth Token. Contact your JobDox account representative if you need help setting up Twilio.

Step 7. Build Workflows in CortexAI

All Staff · ~10 minutes per Work Type · Desktop only
CortexAI generates complete, phase-by-phase task workflows using AI. You describe a job type and it builds the entire workflow, which can then be saved as a template. When a new project is created, that template auto-populates the task list instantly. This is the setup investment that pays off on every single job.
Find it:Advanced Tools → Cortex Suite → CortexAI (opens in a new tab)
1
Open CortexAI in the same browser session as the portal
Important: both the portal and CortexAI must be open in the same browser. They share data through the browser's memory, so CortexAI itself needs no login.
2
Select a Work Type and describe the job
Type something like: "Create a complete workflow for a residential water damage mitigation job including emergency response, water extraction, structural drying, monitoring, and final documentation."
3
Review and edit the generated workflow
The AI produces a structured, phase-by-phase task list. Read through it and adjust anything that doesn't match how your company actually operates. Add company-specific steps, rename tasks, reorder phases.
4
Save as a template and push to JobDox
Save the workflow template tied to the matching Work Type. It syncs back to the portal automatically. Repeat for every Work Type you configured in Step 5.
Uses Cortex Coins

Step 8. Set Up Document Templates

All Staff · ~5 minutes
Document templates are reusable forms (contracts, authorization forms, work orders) that auto-fill with project and client details when applied to a job. Set up your most essential templates now so they're ready for your first project.
Find it:Advanced Tools → Config → Document Templates
Start with these three templates, used on virtually every job:
1

Work Authorization / Direction to Pay

Client signature authorizing your company to perform work and assigning insurance benefits to you.
2

Scope of Work / Estimate

Line-item scope template used for client and adjuster communication.
3

Certificate of Completion

Signed by the client when the job is finished, confirming satisfactory completion.
Tip: Open a document preview after creating a template. Your company name, logo, and address should auto-populate from General Settings. If they don't, revisit Step 2.

Step 9. Create Your First Project

Level 50+ · ~5 minutes · Go Live
Everything from Steps 1-8 comes together here. Create a test project (or your first real job) and walk through the full workflow to confirm everything is wired up correctly.
Find it:Portfolio → + New Project button (top right)
1
Fill out the new project form
Enter client name, phone, email, property address, project type, and work types. The project number is auto-generated, using the JD-YYYY-NNN default unless you pick another format under Project Numbering.
2
Toggle on workflow auto-load
If you built templates in Step 7, a banner shows how many are ready. Toggle on "Load Workflow Templates" and all tasks will be added automatically on project creation.
3
Assign tasks to team members in the Tasks tab
Open the project, go to Tasks, and assign each task or phase to the right staff member. Assigned team members see these tasks in their My Day view.
4
Generate your first document
Go to the Documents tab, select a template, generate it, and confirm the company info auto-populated correctly.
5
Click through every project tab
Overview, Contacts, Media, Documents, Files, Tasks, Drying, Budget, Shift Reports and Scope/Invoice, plus Email, Call History and Project Report under the Tools menu. Know where everything lives before your team starts using it.
You're live. If you can create a project, apply a workflow, assign tasks, and generate a document, your platform is fully operational.
Part 2

Daily Operations

The views and tools your team will use every single day, from checking in on projects to communicating with clients and tracking time.

Project Portfolio

All Staff (visibility varies by permission)
The main landing page showing all active projects as cards or a list. Each card displays project name, client, address, status badge, work type color pills, task count, and (for managers) budget health. Filter by status, search by name or address, sort by various criteria, and toggle between grid and list view. Project cards show a financial health badge (green/yellow/red) visible to users with budget access.
Find it:Left rail → Projects (first icon) · default page after login
Permission gates: Levels 0 to 20 see only personally assigned projects. Levels 30 to 40 see their office's projects. Level 50+ sees all projects. Budget data is hidden below level 50, and the "New Project" button appears at level 50+.
You can log an expense without opening a job. The dashboard carries a quick expense entry with two modes. Company Record books an overhead cost that belongs to the business rather than any job, things like fuel, rent or advertising, and it can be set to repeat on a schedule. Job Record asks which project it belongs to and then hands you the same entry form the Budget tab uses, so a job cost captured from here is identical to one captured inside the job. Either way a receipt can be attached or photographed.

My Day, Daily Planner & Calendar

All Staff
A personal daily planning page with a mini calendar on the left and a time-slotted schedule on the right. Shows tasks assigned to the user across all projects, personal appointments, and a private checklist. A live "now line" shows the current time on the schedule. Level 50+ can use a dropdown to view another team member's full day, which is useful for dispatching and scheduling.
Find it:Left rail → My Day (calendar icon)
For managers: Use the staff dropdown at the top to check anyone's schedule before assigning new work. Calendar days with tasks show an amber dot indicator.

Dispatch Board

All Staff · Requires the Dispatch module
A visual scheduling board for dispatching crews and equipment to job sites. Resources (people, vehicles, equipment) run down the left side; time slots run across the top. Drag appointments to reschedule. Includes a Google Maps view with project location pins and driving routes, useful for proximity-based dispatch when managing multiple active jobs. Resources are color-coded and can represent any dispatchable unit. All data syncs in real time across devices.
Find it:Advanced Tools → Managers → Dispatch
Requires: Office addresses geocoded in Settings → Offices for map proximity features to work.

All Tasks, Company-Wide View

Level 50+
A unified view of every task across every project in the company, without having to click into each project individually. Filter by project, assigned staff, status (open/completed), and priority. Clicking any task navigates directly to that project's Tasks tab. Lower-permission users see only tasks from their assigned projects.
Find it:Advanced Tools → Workspace → All Tasks

Activity Feed

All Staff
One running list of everything happening across every job, newest first and updating as it goes. Where the Portfolio answers what state your jobs are in, this answers what people have actually been doing. It is the screen to open when you want to know whether anything moved this morning, or to reconstruct what happened on a job after the fact.
Find it:Advanced Tools → Workspace → Activity Feed
DA

Date range

Defaults to This Week. Widen it to go back further, and the count of what you are looking at sits beside it.
PR

Project

Narrow to one job, or leave it on All Projects.
PE

Person

Narrow to one member of staff, or leave it on All People. This is the fastest way to answer what somebody did on a given day.
EV

Event type

Filter by the kind of thing that happened. The feed covers around twenty kinds, among them notes, tasks, documents, media, messages, email, calls, scope, estimates, invoices, checklists, reviews, vehicles, maintenance, permission changes and automations.
The same feed appears inside a project. Opening a job and choosing Activity History from the Tools menu shows this list scoped to that one job. Same events, same rows, narrower window. Use the full feed when you do not yet know which job you are looking for.
Events are grouped by day and color coded by kind. Each row carries a colored dot for its event type, so a day of note taking looks different at a glance from a day of documents going out. If a filter leaves you with nothing, the feed says so and offers a Clear filters link rather than looking broken.

Message Center

All Staff
A centralized hub for all SMS conversations across the company. Inbound and outbound text messages are organized into threads. Conversations are linked to projects when possible. Inbound texts from unknown numbers create new threads. Send new messages directly from this panel. All messages also appear within the relevant project's Messages tab.
Find it:Left rail → Messages (chat icon)
Requires: Twilio phone number configured in Settings → Communications → Phones.

Comms

All Staff · Posting to company channels needs level 60+
Comms is where your staff talk to each other. Message Center, one button above it on the rail, is where you talk to customers. The two look alike and sit next to each other, so it is worth fixing the difference in mind early: Comms is internal, Messages is not. Conversations are organized into company channels, one channel per office, one per project, and direct messages between staff.
Find it:Left rail → Comms · on mobile, Advanced Tools → Workspace → Comms
GE

#general

Company-wide. Everyone reads, approved staff post.
AN

#announcements

Company-wide, admin-only posts.
DI

#dispatch

Company-wide dispatch updates.
OF

Office channels

One per office. Staff appear in the channel for the office they are assigned to.
PR

Project channels

One per project, for the crew working that job.
DM

Direct messages

One to one between staff, and threads that include a homeowner.
Staff without the app still take part. A message sent to a group goes out as a text to everyone else in it, and their reply comes back into the channel. A technician who never opens the app stays in the conversation from their phone. Nothing on screen advertises this, and it is the most useful thing about the tool.
Reading is open, posting is not. Everyone can read every channel. Posting to the company and office channels needs level 60, and #announcements needs level 80. A user below that sees the channel and finds they cannot post to it.
Requires: A phone number on the staff profile before you can send a group message. Without one the app tells you to add one in Settings → Staff.

Call History

Level 50+
Every call your company has made or taken through Cortex, in one list, with the recording and the written transcript attached to each. Useful for settling what was actually agreed with a customer, and for hearing how your team sounds on the phone without sitting next to them.
Find it:Advanced Tools → Workspace → Call History
DR

Date range

Set the window you want. If nothing shows, the screen tells you to widen the range or clear the staff filter rather than leaving you guessing.
ST

Staff filter

One person, or All staff. Pair it with a narrow date range to review a particular day.
RE

Recording and transcript

Each call carries its audio and a written transcript. You can rate a transcript when it has misheard something, which is how the transcription improves.
LM

Load more

The list pages rather than loading a year of calls at once, so scroll and it fetches the next batch.
This is the company-wide view. There is a per-job one as well. A single project has its own call list on the Messages and Calls tabs, and the Tools menu on a project goes straight there. Use this screen when you want to look across every job at once, or when you do not know which job the call belonged to.
It shows calls, it does not make them. Placing and receiving calls in Cortex needs the Phone and Calls module and a number set up during onboarding. This screen only reads what that produced, so on a company without calling switched on it will simply be empty rather than unavailable.
Requires: Level 50 to open, and calls only appear if your company has the Phone and Calls module with at least one number configured. Recordings and transcripts follow whatever your recording settings allow.

Company Calendar

Level 70+
One week at a time, staff down the side and days across the top, showing who is where. It pulls five separate things onto one grid so you do not have to check them separately. It creates nothing of its own: everything on it was entered somewhere else. It opens on your own office, and chips at the top widen the view.
Find it:Advanced Tools → Managers → Company Calendar
PT

Time off

Approved PTO, from the requests raised in Time Off and Calendar.
HO

Holidays

Company holidays.
OO

Out of office

Blocks marking someone unavailable without it being PTO.
AP

Appointments

Project appointments and standalone appointments.
LC

Linked calendars

Google and Outlook events, for staff who have connected theirs.
Two layouts. On a wide screen it is a grid of staff rows against day columns. Below 768 pixels it becomes a per-day agenda instead, one card per day with events listed in order and the staff member named on each.
Everyone links their own calendar. Connecting Google or Outlook happens in Settings → Team → Staff, on your own profile, under Calendar Integration. The Connect buttons only appear when you are editing yourself. This is deliberate: the sign-in runs in whoever clicked it, so connecting from a technician's profile would attach your calendar to their account. An admin can see and revoke someone else's connection but cannot create one for them.
Requires: Staff assigned to offices, or the calendar opens empty.

Clock In / Clock Out

All Staff
Record billable time against a specific project. Staff select their task or activity, confirm their rate, and clock in. While active, a green pulsing dot appears in the rail. Clocking out automatically records the shift with duration, rate, and calculated labor cost. Only one project can be clocked into at a time. Switching auto-closes the previous shift with a note. All shifts feed into the project's Shifts tab and the Payroll module.
Find it:Any project → Clock In button, or the clock icon in the left rail / mobile bottom nav
Part 3

Inside a Project

Click any project from the Portfolio to open the project detail view. Tabs appear across the top. Which ones you see depends on your permission level.

Overview Tab

All Staff · Default first tab
The project's home base. Shows all core details at a glance: project name, client, address, type, status, auto-generated project number, and assigned staff with their roles and permission levels. Also contains the daily notes log, a chronological journal where team members record what happened each day (with timestamp and author). Work type toggle switches drive CortexAI automations. The Client Portal toggle controls whether the homeowner can view project updates through the customer-facing portal.
Find it:Project → Overview tab (shown by default)
Daily Notes: Each note shows the author's name and timestamp. Notes can be flagged "visible to client". Only those notes appear in the customer portal. Use daily notes as your project journal for documentation and adjuster communication.

Contacts Tab

All Staff
Manage everyone associated with a project, including homeowners, adjusters, insurance agents, mortgage companies and property managers. Each contact has a name, email, phone, and role (free-text field, e.g., "Adjuster", "Insured", "Mortgage Co."). Contacts are used for sending SMS, emails, review requests, and document signing requests throughout the project.
Find it:Project → Contacts tab

Media Tab, Photos & Files

All Staff
Upload, organize, and view photos and files for the project. Organize photos into folders (Before, After, Moisture Readings, Equipment, etc.). Supports drag-and-drop upload, camera capture on mobile, and bulk upload. Every upload records the timestamp and uploader's name automatically. Photo galleries feed into the Project Report tab for comprehensive documentation packages.
Find it:Project → Media tab

Capturing 360 Images

All Staff
Cortex supports 360 images natively, so you can connect a 360 camera and capture full room views right from the Cortex app, then view them inside the app without any extra software.
Find it:Project → Media tab → Add → 360 Image
Mobile app only. 360 capture is available in the Cortex mobile app only. It is not available on the web version of Cortex.
1
Open the project and go to the Media tab
Open the project in the Cortex mobile app and go to the Media tab.
2
Tap Add, then choose 360 Image
Tap Add, then choose 360 Image.
3
Connect your 360 camera
A window will pop up asking you to connect your 360 camera. On iPhone or iPad (iOS), enter your camera's serial number. On Android, connect your phone to the camera's Wi-Fi network.
4
Take your 360 images
Once connected, take your 360 images. Cortex supports them natively, so you can view them right inside the app.

Tasks Tab

All Staff (vendors see only assigned tasks)
Full task management for the project. Create tasks, assign to staff, set due dates, and mark complete. Each task has a threaded comment system. Comments can trigger SMS notifications to the assigned team member. Tasks can be created manually or auto-populated from CortexAI workflow templates on project creation. When a task with a status trigger keyword is completed, the project status automatically advances to the next stage.
Find it:Project → Tasks tab
Status auto-advance: In Settings → Statuses, each status stage can have a trigger keyword. When a task containing that keyword is completed, the project moves to the next status automatically, with no manual update needed.

Messages & Calls Tabs

All Staff
M

Messages Tab

Project-specific SMS hub. Send texts to any project contact. An AI button appears on received messages. Click it to open the Adjuster Response Bot, which generates a professional rebuttal grounded in IICRC standards. Also shows daily notes that can be automatically emailed to the client on a schedule (daily, weekly, or off).
C

Calls Tab

All calls linked to this project, inbound and outbound. Each entry shows caller name, direction, status, duration, and timestamp. Play button for call recordings. "Transcript" button expands to show full AI transcription, extracted customer details, detected keywords, and AI-generated call summary. "Call Client" initiates an outbound call through Twilio.
Find it:Project → Tools → Communications → Email or Call History

Scope / Invoice Builder

Level 70+
Build line-item scopes of work and generate invoices. Add line items manually, from your price list, or from scope macros configured in Settings. Each line item has a description, quantity, unit (SF, LF, EA, HR, etc.), and unit price. The system auto-calculates subtotal, overhead/profit percentage, tax, and grand total. Generate PDF invoices, email them to contacts, or push billing items from Cortex Dry directly into this tab.
Find it:Project → Scope/Invoice tab
Scope macros: Save a standard room layout with its line items once under Settings → Scope & Invoicing → Macros, then apply it to a project's scope in one click. Set a count to multiply every line (7 units gives 7× each quantity), and prices come from the current price list.
MA

Macros

A saved room layout with its line items already attached, applied to a scope in one click. Build a standard room once, with the items you always bill on it pulled from your price lists, then drop it onto any job that needs it. A macro can hold several rooms plus a bucket of project wide items that belong to no room in particular.

Budget Tab

Level 50+
Per-project financial tracking. Budget vs. actual comparison by category, invoice tracking (sent/paid/overdue), labor cost summary from time entries, vendor and subcontractor costs, and profit margin calculations. The "Add Estimate" button imports an Xactimate PDF and turns its Recap categories into budget entries. The AI Analysis button sends the project's financials to Claude for a plain-English profitability analysis that identifies cost overruns, budget risks, and optimization opportunities.
Find it:Project → Budget tab
E

Expenses

Three kinds of spending are logged against the job: a Bill from a vendor, Petty Cash, and a Credit Card charge. Bills and petty cash wait on approval before they count against the budget; a credit card charge does not. Petty cash and credit card entries each make you choose a budget category; a bill does not. Any of the three can carry a receipt, either attached as a file or photographed on the spot.
Photograph a receipt and let the form fill itself in. The entry form can take a picture of a receipt or invoice, or use one already in your photos, and read it. It fills in the amount, the date, the vendor, a description, and the budget category when it recognizes one, and it keeps the picture it read as that entry's receipt so you are not attaching the same thing twice. It also compares the receipt against the entry type you chose and speaks up when they disagree, for example when Bill is selected but the receipt looks like a paid fuel purchase. If it cannot make sense of the image the photo is still attached and you fill the details in yourself. Reading the receipt spends Cortex Coins. Taking the photo and attaching it does not, and neither does a read that fails.
Budget Categories and Overhead Categories are two different lists. Budget Categories are the per job cost codes, edited at Settings → Projects → Budget Categories, and they are what the expenses on this tab use. Overhead Categories are your company's own running costs, things like fuel, rent and advertising, edited at Account → Tools → Overhead Categories, and they never attach to a project. The two editors look almost identical and are deliberately kept apart. Reaching for the wrong one is the usual reason a cost fails to turn up where somebody expects it.
Uses Cortex Coins

Shift Reports Tab

Level 50+ · Requires the Timecards module · Rate data gated at 70+ and 80+
View all time entries (shifts) logged against this project. Each shift shows staff name, clock-in and clock-out times, total hours, billing rate, labor cost, pay type (Regular/Overtime), and billable status. Supports both automatic shifts from the clock-in system and manual entries. Shift data feeds into budget calculations and the company Payroll module.
Find it:Project → Shift Reports tab
Permission note: The rate and cost columns are hidden below level 70. Pay rates are hidden below level 80. Hours and names are visible to all users who can see the tab.

Documents Tab & PDF Signing

All Staff · Hidden documents need level 80+
Upload, organize, preview, download, and email project documents. Apply document templates to generate pre-filled contracts and forms. The PDF signing feature allows sending signing requests to contacts via SMS. Each signer gets a unique secure link. Sequential signing ensures signers complete in a specified order. Signing status (pending/signed/completed) is tracked in real time.
Find it:Project → Documents tab
Requires: Twilio phone number configured for SMS delivery of signing links.

Files Tab

All Staff · Requires the Files module, which is off by default
A file manager view of the same documents the Documents tab holds, for jobs where the paperwork has outgrown a single list. It is laid out like the file explorer on your computer: a folder tree down one side, an address bar across the top, and a choice of Details, List or Icons for the main pane. Nothing here is a second copy. A file put in a folder is the same file the Documents tab shows.
Find it:Open a project → Files tab, once the module is switched on
FO

Folders

Make as many as you need and nest them. Drag files between them, or use Move to on one or on a whole selection. A file that is not in a folder sits at the root, which is where everything starts.
ZI

Zip

Download a folder, a selection, or a single file as a zip. Useful when an adjuster wants the whole job in one attachment rather than eleven.
SE

Search this folder

Filters what is in front of you rather than the whole job, which is usually what you want once the folders are doing their job.
AD

Email to adjuster

Sends the selected files straight out, the same route the Documents tab uses.
VI

View modes

Details, List and Icons. Details is the one that shows dates and sizes.
Two views of one set of files, not two sets. Documents and Files read the same store. Upload in one and it appears in the other. Think of Documents as the list you work down and Files as the cabinet you organize, and use whichever suits the job in front of you.
Some things appear here but are managed elsewhere. Receipts and bills show as Read only, from the Budget tab, and photos are marked as captured in Media. You can see them, fold them into a zip and email them, but the place to add or change one is the tab that owns it.
Signing stays in the Documents tab. A file waiting on a signature shows a Sign / manage link here, and it takes you back to Documents to do the work. That is deliberate rather than a gap: the signing flow lives in one place so a document cannot end up half signed from two directions.
Requires: The Files module, which ships switched off. An owner or admin turns it on at Settings → Access & Features → Module Control. Most companies never need it; turn it on when a job routinely carries more paperwork than one list can hold.

Project Report Tab

Level 40+
Generates a comprehensive project report combining all data into one printable document, including project details, daily notes, photos from the Media tab, document list, and key metrics. Formatted for print with proper headers, page breaks, and your company branding. Useful for insurance documentation packages, client closeout reports, and internal reviews.
Find it:Project → Tools → Documents → Project Report

Project Tools Menu

All Staff · No permission level required
Every project page carries a Tools button in its header. It holds the actions you take about a job rather than the records you keep on it, so it is the fastest route to the map, the customer and the checklist. Most of what it lists is a shortcut to a tab documented elsewhere in this guide. The six below exist only here, so they are the ones worth learning.
Find it:Open any project → Tools in the header row, directly above the tabs
N

Navigate to Job Site

Opens the job address in your device's own map app. It uses the project address, and for a project stored with map coordinates instead of a street address it drops a pin on those.
S

Send Notification

Opens the Notify Customer window. Choose which contacts to text, set how many minutes out you are, and the app sends your company's saved arrival message. It offers a live traffic estimate when you allow location access, and lets you type the minutes yourself when you do not.
C

Start Checklist

Opens the visit checklist picker so a technician can run one of your templates against this visit. It appears only when the Visit Checklists module is on.
Q

Contact Client

Opens Quick Contact. Pick a person attached to the project, then call, text or email them without hunting for the number.
R

Request Review

Texts a contact a short thank you with your office's Google review link. You can edit the wording before it sends.
A

Activity History

Opens the project's full activity feed in a window, so you can read the history without leaving the tab you are working in.
The arrival message is written in one specific place. Settings → Communications → Messaging, under the entry named Notify Customer. It is not in SMS Templates, which is a separate library of free-form messages staff pick from by hand. Editing the wording here changes what every arrival text says.
The arrival time reads as a clock time, not a countdown. You type how many minutes away you are, and the customer receives an actual time such as 3:45 PM. If you rewrite the template, leave the arrival marker standing on its own and do not follow it with the word minutes, or the text will read like a time with a stray word after it.
Navigate picks the map app for you. It opens Apple Maps on an iPhone or iPad and Google Maps everywhere else. That choice follows the device and there is no setting for it. A project saved without an address opens an empty map, which is usually the first sign that the address field was never filled in.
Nothing in this menu has a permission level. Anyone who can open a project can text that project's customer, request a review, or start a checklist. Permission levels control the tabs and the records, not these actions. Worth knowing before you give a new hire access to a live job.
Three ways to reach the same person sit next to each other. Send Notification is your saved template and goes out from the company number. Contact Client is free text for a one off. The Message Center, on the left rail, is the threaded conversation you can go back and read. One catch: the Text button inside Quick Contact hands the message to your phone's own texting app, so that exchange happens on your personal number and never reaches the project record. Use the Message Center for anything you want kept.
Requires: Start Checklist needs the Visit Checklists module. Call and Text inside Quick Contact need the Phones and Calls module. Request Review needs a Google Business review link saved against the office, which is added in Settings → Offices.
On a phone the menu scrolls. The same list appears on mobile, but the screen cannot show all of it at once, so the menu scrolls and the items below the fold are easy to miss. If something described here is not where you expect it, scroll the menu before assuming the tool is missing.
Part 4

Specialized Restoration Tools

Industry-specific modules that handle documentation and billing unique to restoration work, including drying records, contents inventories, estimates, and adjuster communications.

Cortex Dry, Drying Documentation

All Staff · Editing from level 20+ · Requires the Cortex Dry module
Cortex Dry documents a water damage job from the first inspection through to final dry standards. Work is organized into chambers. A chamber is one contained drying environment, such as an upstairs, a garage or a crawlspace, and the rooms, readings, equipment and alerts on a job all belong to a chamber. Create a chamber first, then add its rooms, then record readings against them.
Find it:Project → Drying tab
Two views, chosen by screen width. On a screen 900 pixels wide or narrower the module opens the Wizard, a guided flow built for a technician working on a phone in the building. On a wider screen it opens the Workbench, the desktop page a manager reviews from. The Wizard covers readings, rooms and sketching, deploying and retrieving equipment, and scope lines. The alerts strip, the audit log and the drying log PDF are Workbench only. Equipment days reach the Scope tab from either view. The view is picked once when the tab opens and does not change if you resize the window, so either view has a button to switch to the other. On the Workbench it is the Wizard button in the header. That matters on a tablet, where you may want the review tools on a screen that opened as the Wizard.
Getting started on a project:
1

Initialize drying for this project

The first time anyone opens the Drying tab on a project, the Workbench shows a single button with this label. Press it once to create the drying record for the job. This one control is not permission gated.
2

+ Add Chamber

Opens a dialog headed Add chamber. Give it a Chamber label such as Upstairs or Garage, then set the Water category, which is Cat 1, Cat 2 or Cat 3, and the Class of water, which is Class 1 through Class 4.
3

+ Add Room

Add the rooms that belong to the chamber. Adding a room before any chamber exists creates a Main Chamber for you. Both Add controls are hidden below permission level 20.
4

Record readings

Once a chamber has rooms, open the chamber and start logging readings. Everything else in the module builds on those readings.
Inside a chamber:
RD

Readings

You enter Temp °F and RH %, and the platform works out grains per pound and dew point for you. There is no GPP field to fill in. Five reading types cover chamber atmosphere, wall moisture, floor moisture, ceiling moisture, and dehumidifier intake and exhaust pairs. Readings can be backdated when a tech logs a day late, and every edit writes an entry to the audit log.
SP

Specifications

Square footage, linear feet and cubic feet for the chamber and for each room, plus a table of the room walls and the date of loss.
LY

Layout

Position the rooms on a canvas to build the floor plan. When two rooms are placed against each other the shared wall is paired automatically, so a wall between them is not measured twice.
MO

Moisture

Paint which walls are wet and which part of the floor is affected. This is the input that drives equipment sizing and the alerts, so it is worth doing properly rather than skipping.
EQ

Equipment

Record what is on site and when. + Deploy equipment puts a unit from your inventory into a room, Retrieve now and Retrieve at time pull a single unit, and Pull Equipment retrieves everything deployed in the chamber at once. The tab also shows the target dehumidifier capacity and unit count for the chamber, calculated from the affected area.
SC

Scope

Build scope lines for the chamber against a price list you pick. Where the Voice Scope module is turned on, a Voice button lets a tech speak the work done in a room and Cortex matches it to lines on that price list.
S500 sizing and alerts run in the background. Cortex applies ANSI/IICRC S500 sizing to the affected area and watches each chamber as readings come in. It raises an alert for a drying stall, a possible active water source, a category that looks like it has degraded from Cat 1 to Cat 2 or Cat 2 to Cat 3, mold risk, and a dehumidifier shortfall against what the chamber needs. These checks cost nothing to run. The alerts strip is on the Workbench.
What you can produce:
PD

Generate drying log

A single PDF for adjuster or client handoff, under the Reports heading on the Workbench. It carries your company header, the project details, and for each chamber the rooms table, the equipment currently deployed, any active alerts, and a dated readings table. It saves straight to the project Documents tab. It does not include photos, room sketches, charts or a written narrative, so if you need those in an insurance package you will still assemble them separately.
PS

Equipment on the Scope tab

The equipment you record shows up as line items on the project Scope tab by itself. Nobody has to push it. There is one line per billing item, split by room, and the quantity is the equipment days. Each unit's days are counted across every deployment period, then rounded up, with a minimum of one day. The lines update as equipment is deployed, moved and pulled, and a unit still on site gains a day as each day passes. On the Scope tab they have a blue left edge and a From Drying · live tag. You can't edit or delete them there; change the equipment in Drying instead. Lines logged in the Drying Scope step have the same blue edge with a From Drying tag, and you can edit those.
The equipment lines always match the equipment log. If a deployment is deleted from the log, its days come off the Scope tab. Equipment with no billing line in Equipment Manager is not billed, and the Workbench lists it under Not billed until it is fixed. Updates stop once the project is complete or archived. They are made by anyone who has the project open and can edit Drying. Anything you typed on the Scope tab by hand is never touched.
Set this up first: Cortex Dry has to be switched on under Settings, Access & Features, Module Control. Set your dry standards and complete the How You Dry interview under Settings, Modules, Cortex Dry. For billing to work you also need a price list carrying equipment day items, and every equipment model linked to a line on it under Advanced Tools, Managers, Equipment Manager, using the Price List and Item fields on the model. That last step is the one most often missed. Without it the push to scope quietly skips the unit and tells you to link a model in Equipment Manager. Finally, stock your equipment inventory, because a deploy records a real item rather than a free text note.
LiDAR room scanning needs the installed iOS or Android app. It does not work in a phone browser.
Voice Scope uses Cortex Coins
The first video covers the whole module, both views included, and is the one to watch if you only watch one. This one stays in the Wizard, which is enough if your crew only ever works from a phone.

Cortex Contents, Contents Documentation & Schedule of Loss

Level 20+ · Fire/smoke/water losses
A complete contents documentation system for recording personal property affected by a loss. Each item record includes room location, description, quantity, condition, age, replacement cost (RCV), actual cash value (ACV), and photos. The AI comparable search feature finds current replacement prices from online retailers automatically. Generates a professional Schedule of Loss PDF for insurance submission with all items, values, and totals.
Find it:Project → Tools → Modules → Cortex Contents
Uses Cortex Coins

Cortex Estimate, Good / Better / Best Estimate Builder

All Staff · Requires the Cortex Estimate module
Create tiered estimates for clients with three pricing levels: Good (economy), Better (standard), and Best (premium). Each tier has its own set of line items and prices. The estimate is presented in a side-by-side comparison format that clients can review and choose from. The accepted tier feeds into the project's financial tracking for budget comparison. Multiple estimate revisions can be saved.
Find it:Project → Tools → Financials → Cortex Estimate
Already on video. The Dispatch Board walkthrough in Part 2 covers quick estimates as well.

Adjuster Response Bot AI

All Staff · Requires the Adjuster Response Bot module
Generates professional responses to adjuster emails and customer communications. The AI reads the received message along with the project's daily notes, company information, and industry context to craft a detailed rebuttal grounded in IICRC S500/S520 standards. Select the sender's role (adjuster, homeowner, insurance agent), provide custom instructions to guide tone or focus, and generate the response. Edit inline, copy to clipboard, or insert directly into an email draft. Regenerate as many times as needed.
Find it:Project → Tools → Communications → Email → AI icon on any received message
Uses Cortex Coins

Visit Checklists

All Staff to fill one in · Level 80+ to build templates · Requires the Visit Checklists module
A visit checklist is a set of questions an office builds once and a technician answers on site. Use it for an inspection walkthrough, a safety check, or a completion sign off. The office writes the template and decides when it should appear; the technician sees it on the project, answers it, and captures a signature if one is called for.
Find it:Settings → Modules → Visit Checklists to build them · open a project → Tools → Start Checklist to fill one in
TE

Templates

The checklists you have written. Each carries a name, a priority of High, Medium or Low, and the work types it belongs to. Keep as many as you need and pick the right one per visit.
IT

Checklist Items

The questions themselves. Each is a Checkbox, Text, Notes, Number or Photo. Switch on per-room items and a question repeats once for every room on the job.
RQ

Requirement level

Set on each question: Optional, Required or Important. See the note below, because Important does not behave the way most people expect.
ON

Once

A per-question tick. An item marked Once is answered a single time for the whole project rather than on every visit.
ST

Status Triggers

The project phases that should bring this checklist forward. When a project reaches one of them, the checklist offers itself to whoever opens the job.
SG

Signature Requirement

None, Staff Only, Customer Only, or Both. A checklist cannot be finished until the signatures you ask for are captured.
NT

Notify on Completion

Choose the lowest staff role that should be told when someone finishes this checklist, or leave it on No notification. Only staff assigned to the project are messaged.
There are three requirement levels, not two. Optional and Required behave as you would expect. Important is the useful one: a technician can move past it without answering, but only by typing a note explaining why, and that note carries forward to the next visit on the same project. It is the right setting for anything you want a reason for rather than a refusal.
Once means once per project, not once per visit. Tick Once on a question and the moment it is answered on any visit, later checklists on that job treat it as already done and stop asking. Good for the things that are true of the property rather than the day, such as where the shutoff is or whether there is a dog on site.
What a checklist holds up, and what it does not. The Complete button stays grayed out until every Required question has an answer, every Important one has an answer or a skip note, and any signature you asked for is captured. That is the only thing it blocks. Save and Continue Later is always available, the prompt that offers a checklist has a Not now button, and no other part of the platform waits on an unfinished one.
This is not the vehicle checkout checklist. They are two separate systems that are easy to confuse. The vehicle one has its own template in Vehicle Manager → Checkout Checklist, it runs in My Day when a driver checks out a vehicle, and there the required items really do block: the driver cannot take the vehicle until they are answered. Building one does not build the other.
Requires: The Visit Checklists module, switched on in Settings → Modules. Writing or editing a template needs level 80. Filling one in needs no permission level at all, so any staff member who can open a project can complete a checklist on it.
Part 5

Business Intelligence & Reporting

Company-wide analytics, financial oversight, payroll management, and local marketing. These are the tools that give you a view of the entire business, not just individual projects.

Cortex Closer, Sales Pipeline

Level 30+ · Requires the Cortex Closer module
A sales pipeline for the work that is not a job yet. Leads sit in stages you define and move along as they progress, so the estimate you gave last Tuesday does not quietly disappear. Contacts, the organizations that refer you, and the routes your reps drive all hang off the same list, and a lead that closes becomes a project without being retyped.
Find it:Left rail → Cortex Closer, when the module is on
LE

Leads

Each carries a contact name, a company, an address, a source and a pipeline stage. Move one along with Move to stage, and mark it Converted when it becomes real work.
OR

Organizations

The firms that send you business, whether that is an adjuster, a plumber or a property manager. A lead can record which organization referred it and which individual there.
RO

Routes

Planned visits for a rep, so a day of calls on referral partners can be laid out rather than improvised.
PI

Pipeline stages

You define them. The stage list is yours to shape around how you actually sell, rather than a fixed funnel.
CO

Commissions

Where a closed lead carries a commission, it is tracked alongside the pipeline rather than in a separate spreadsheet.
This module is not available yet. Cortex Closer is built and listed in Module Control, but it is held for a later release and cannot be switched on by your company. It appears here so you know what is coming and can plan for it. When it opens, an owner or admin turns it on in Module Control like any other module.
Requires: The Cortex Closer module. It carries a Phase badge today, which means it is complete but not yet released.

Reports Dashboard

Level 50+ · Some reports need level 70+
Company-wide analytics with multiple report types. Filter any report by date range, office, project type, and work type. The Analyze button sends current report data to Claude for trend analysis and actionable recommendations.
Find it:Advanced Tools → Cortex Suite → Reports
PL

Pipeline

Every project by status, filterable, so you can see where jobs sit in the lifecycle.
RV

Revenue

Revenue by period with breakdowns across all projects.
WP

WIP

Active projects with budget versus actual, so overruns surface while the job is still open.
AR

AR Aging

Outstanding receivables by age.
RP

Reputation

Tracks Google review requests sent, response rates, and review scores by office. Shows which offices have review links configured and which still need setup.
AI

AI Insights

Sends current report data to Claude for intelligent analysis. More report types are available alongside these, including Territory, Hours, Referrals, Flags and a Custom report builder.
Uses Cortex Coins

Company Financial Dashboard

Level 50+
A high-level financial overview of the entire company. Shows aggregate metrics across all projects: total revenue, total costs, gross margin, accounts receivable, and accounts payable. Includes revenue trend charts over time, project profitability comparisons, and cash flow analysis. Drill down into individual project financials from this view. Financial health badges on portfolio cards provide at-a-glance status. Green means healthy margins, yellow means watch, and red means over budget.
Find it:Advanced Tools → Cortex Suite → Financial Dashboard

Timecards

Manage timecards permission to open Shift Manager · View payroll for the Payroll Report · View / Edit pay rates for rates
Company-wide time tracking in one place. Shift Manager is a week grid of every staff member's shifts: log shifts on their behalf across several projects and Overhead in one pass, edit or void a shift, see who is on the clock right now and clock them out, review shifts flagged by the auto-clockout watchdog, and log time off. The Payroll Report aggregates hours, regular vs. overtime, pay cost and margin for a pay period, exports a payroll CSV, and locks closed pay periods. Rate Settings holds pay and billing rates per position plus hourly/salaried status, and the QuickBooks Online tab pre-maps employees and projects for time-activity sync.
Find it:Advanced Tools → Managers → Timecards

Cortex Reach (Coming soon), SEO Yard Sign Pages

Level 50+ · Requires the Cortex Reach module (Coming soon)
An automated local SEO tool that generates public "digital yard sign" web pages for completed projects. When a project status changes to Completed, the system automatically publishes a page at a URL like jobdox.ai/pros/your-company/water-mitigation-tulsa-ok, with Schema.org structured data for Google indexing. Re-opening a project automatically unpublishes its yard sign. A dashboard shows all published signs with locations. Connects to Google Ads and Analytics data via Zapier for ROI tracking.
Find it:Advanced Tools → Cortex Suite → Cortex Reach (Coming soon)
Fully automatic: No action needed beyond completing a project. Yard signs are created and published automatically. A sitemap at /sitemap-yards.xml helps search engines discover all pages.
Optional setup: Cortex Reach (Coming soon) connects directly to Google Business Profile and Google Analytics, and the Google Ads connection is part of the upcoming Reach release.

Cortex Reach (Coming soon), Website Widget

Level 50+ to view · Level 80+ to copy the code · Requires the Cortex Reach module (Coming soon)
Show your recent completed projects and customer reviews on your own website. Open Cortex Reach (Coming soon), then Yard Signs, and find the Website widget section. Check the live preview, choose Copy embed code, and paste it into a Custom HTML or Embed block on your website builder (steps for WordPress, Wix, Squarespace and GoDaddy are right there). Prefer to hand it off? Choose Copy instructions for my web person and send them the text. The widget updates by itself, and the section shows "Installed on your website" with the date it was last seen once the code is live. Keep the small "Powered by Cortex" line that comes with the code.
Part 6

AI Features

Every AI feature is powered by the Anthropic Claude API. All AI features consume Cortex Coins, your AI credit balance. Track it in Account → Billing & Plan → Cortex Coins.

Review Manager

Level 50+ · Requires the Review Manager module
Every review request your team has sent, in one place, so you can see who was asked and who actually left one. Requests go out from inside a job, and this is where they are tracked afterwards.
Find it:Advanced Tools → Managers → Review Manager
SR

Sent Requests

The default view. Every request with its project, contact and office, filterable by office and by status: Awaiting, Completed or Failed. Open one for the detail.
IN

Insights

How many went out, how many came back, and the completion rate, broken down By Office. The number worth watching is the rate rather than the total.
MC

Marking complete

Until the Google connection lands, staff mark a request completed by hand once they have seen the review appear.
Requests are sent from inside a job, not from here. Open a project, then Tools → Request Review. The screen says as much when the list is empty. This page is the record afterwards, which is why a company that has never sent one finds it bare.
The Reviews tab is not connected yet. Alongside Sent Requests there is a Reviews tab that reads Google reviews coming soon. Pulling your actual Google reviews in, and replying to them from here, arrives with a later release. Everything about tracking requests works today.
Requires: The Review Manager module and level 50. Requests also need a Google Business review link saved against the office, which is set in Settings → Offices.

Cortex, AI Chat Assistant AI

All Staff
A slide-out AI chat panel trained specifically as a restoration industry project management assistant. Ask questions about your company data in plain language. The AI has access to all project data the current user can see. Ask things like "Which projects are overdue?", "What's our total revenue this month?", "Which jobs need moisture readings today?", or "Who is assigned to the Elm Street project?" The AI responds conversationally with insights, summaries, and suggestions.
Find it:Left rail → Cortex (sparkle icon), or mobile bottom nav → Cortex
Uses Cortex Coins
Note: Conversation history is kept on your own device, so a previous answer survives closing the panel or refreshing. When coins are exhausted, Cortex will indicate that AI features are paused until the next billing cycle.

CortexAI, AI Workflow Generator AI

All Staff · Requires the CortexAI module · Desktop only
A standalone AI tool for building restoration workflows as interactive mind maps. Select a Work Type, describe the job type and requirements, and the AI generates a complete multi-phase workflow with tasks, role assignments, and dependencies organized visually. Drag and drop to edit nodes, collapse phases, and add custom tasks. Save as a template and push to JobDox. It becomes the auto-loaded task list for any new project of that work type. CortexAI reads your staff data and work types directly from the portal session.
Find it:Advanced Tools → Cortex Suite → CortexAI (opens new tab at /mindflow.html)
Important: CortexAI must be opened in the same browser session as the portal. Both tools communicate through your browser's memory, so no separate login or API key is needed.
Uses Cortex Coins

All AI-Native Features, Quick Reference

Platform-wide
1

CortexAI Workflow Generator

Input: Work type + description. Output: Structured multi-phase task workflow with role assignments. Where: /mindflow.html
2

Cortex Chat

Input: Natural language question about your projects/data. Output: Conversational answer with analysis. Where: Left rail → Cortex
3

Adjuster Response Bot

Input: Adjuster/customer message + project context. Output: Professional rebuttal grounded in IICRC standards. Where: Project → Messages → AI icon
4

Finance AI Analysis

Input: Project financial data. Output: Profitability analysis with cost overrun flags and recommendations. Where: Project → Finance → Analyze button
5

Reports AI Analysis

Input: Company-wide report data. Output: Trend analysis, performance summary, strategic recommendations. Where: Reports → Analyze button
6

Call Transcription + Auto Project Creation

Input: Twilio call recording. Output: Full transcript, extracted customer details, optional automatic new project creation. Where: Automatic, triggered after recorded calls
7

Cortex Contents Price Search

Input: Item name and description. Output: Current comparable replacement prices from online retailers. Where: Project → Cortex Contents → AI search icon

Cortex Coins, AI Credit System

Level 80+
Cortex Coins meter the platform's AI features. Every plan includes an allowance that renews each billing cycle, and unused coins carry over to a limited extent. The Coins dashboard shows your current allowance, your usage so far, your remaining balance and your plan. When an allowance is used up, AI features pause until the next cycle begins or additional capacity is added.
Find it:Advanced Tools → Config → Account → Billing & Plan → Cortex Coins
Additional capacity: Teams running heavy AI workloads can talk to us about more coins at info@job-dox.com.
Part 7

Administration & Advanced Settings

Company configuration and the tools that support it: which modules are switched on, who can do what, the messages sent to your customers, plus vendors, price lists, equipment, vehicles, integrations, billing and team time off. Mostly for owners and admins.

Module Control

Level 90+
Cortex ships with more tools than most companies want on screen at once. Module Control is the master list: it decides which of them your staff can see at all. Anything switched off here disappears from the rail, from the project tabs and from Settings for everybody in the company, so this is the first screen to visit if the platform feels busier than the work you actually do.
Find it:Settings → Access & Features → Module Control
C

Five categories

Modules are grouped as Fieldwork, Operations, Sales and Marketing, Communications, and AI and Automation. Each entry shows its name and a one line description of what it adds.
S

Off, On, and sometimes Beta

Most modules are a straight two way switch. A few also offer Beta, which turns the tool on in its unfinished form for companies happy to try it early.
P

Phase badges

Some modules carry a Phase badge and cannot be switched on. They are built but not yet released. See the note below.
E

Immediate effect

There is no save button. The panel says so itself: changes take effect immediately.
Switching a module off hides it. It does not delete anything. The tool disappears from every screen, but the records it created stay where they are. Switch it back on and the history is still there. That makes this a safe screen to experiment on, which is worth knowing because it is otherwise an intimidating one.
A module showing a Phase badge cannot be turned on, by anyone at your company. The badge means the tool is finished enough to list but is being held for a later release. The selector is disabled and hovering it reads Coming in Phase N. Only JobDox staff can lift that, one company at a time, and we would only do it if we had agreed to it with you first. Nothing you do on this screen will unlock one.
The screen words the permission requirement the old way. If you do not have access it says Level 9 or higher required to manage features. That is the same thing as level 90 on the scale the rest of the platform now uses, where roles run from 0 to 100. You need a role at 90 or above, which in the shipped roles means Director or Admin.

Roles & Access

Level 80+
Where you decide who can do what. Cortex seeds eleven roles to start you off, but none of it is fixed: you can rename them, recolor them, change what level each one sits at, add roles of your own, delete ones you will never use, and retune what any individual capability actually requires. Two people at different companies on a role called Manager can have quite different powers, and that is the point.
Find it:Settings → Access & Features → Roles & Access
RO

Roles

The list of roles at your company. Each has a name, a color and a level from 0 to 100. Add one with New Role, which asks for a name, a permission level and a color, and delete any you do not want. The eleven shipped roles run from Vendor / Subcontractor at 0 up to Admin at 100, ten points apart.
CA

Capabilities

Under each role sits the list of what it can do. Every capability has a Needs figure, also 0 to 100, and you can type a new one. Raise it and fewer people can do that thing; lower it and more can. There is a Search capabilities box because the list is long.
PR

Preview

Pick a person and see exactly what they can and cannot do, resolved from their role. This is the screen to open when someone says they cannot find a button, rather than guessing at levels.
AS

Assign roles to existing staff

A one time catch up for companies that were using the older numeric levels. It gives everybody the role matching the level they already had.
Levels and capability requirements are the same scale. A role sits somewhere from 0 to 100, and each capability needs a number in that same range. Somebody can do a thing when their role level is at or above what the capability needs. That is the whole model. The permission tables elsewhere in this guide quote the shipped defaults, so if you retune a capability, this guide is describing the default rather than your company.
Changing a capability changes it everywhere at once. The requirement is company wide, not per person. Lower the figure on a capability and every role at or above the new number gains it immediately, across every screen that checks it. Use Preview afterwards on somebody at the level you were worried about, and confirm you got what you meant.
Giving a person their role happens elsewhere. This screen defines the roles. Attaching one to a member of staff is done in Settings → Staff, on that person's record. It is a common place to get stuck: you can build a perfect role here and nobody has it yet.

Messaging Setup

Level 80+ to reach Settings · No further gate on this tab
Cortex sends texts and emails to your customers on your behalf, and this is where you write them. There are eight of these system messages, each tied to one thing the platform does, and each shipped with wording you can replace. Worth an hour early on: these are the sentences your customers actually read, and the default voice is ours rather than yours.
Find it:Settings → Communications → Messaging
MD

Message Defaults

The eight messages: Notify Customer, Contact Added to Project as a text and again as an email, Estimate Ready as a text and again as an email, Signature Request as a text and again as an email, and Document Reminder. Each shows the merge tokens it accepts, a preview, and a Reset to Default button to put the shipped wording back.
PU

Project Updates

An automated recap sent to the customer on a schedule. Choose whether Cortex writes the summary itself or sends your client visible daily notes word for word, and set the schedule to End of Day, End of Week, or Never so it only goes when you send it by hand.
CN

Contact notifications

A company wide switch for whether a contact gets a text when they are added to a project. On by default, and held off automatically while the customer portal is switched off.
These are not the SMS and Email Template libraries. The templates listed under Settings → Communications → SMS Templates and Email Templates are free text drafts a staff member picks by hand when writing to somebody. The eight here are different: each is wired to one specific thing the platform does, fires without anybody choosing it, and carries its own merge tokens. Editing one here changes every message of that kind your company sends.
Project Updates starts switched off, and there is a middle setting. Because it mails your customers on a schedule, it ships off. It also offers a review mode between off and live: turn that on, let it run for a week, read the copies it produces, and only then go live. Skipping the review step is the fastest way to send a hundred customers something you would not have written.
This tab has no permission level of its own. Getting into Settings needs level 80, but once someone is there nothing else stands between them and this screen. Anyone who can open Settings can rewrite the text every one of your customers receives. It is worth knowing when you decide who gets Settings access at all.

Contact Manager

All Staff
Your company address book, kept separately from any one job. Every customer and contact you have ever added lives here, searchable by name, phone or email, with the jobs they are attached to listed against them. It answers the question a project cannot: have we worked with this person before, and what happened.
Find it:Advanced Tools → Managers → Contact Manager
SE

Search

One box across name, phone and email. Filter by office or brand as well, or leave it on All offices.
JO

Their jobs

Open a contact and every project they are attached to is listed, so a repeat customer is obvious before you quote them again.
ED

Add and edit

Create a contact here rather than inside a job when you are building your book up front, and correct details in one place rather than on each project.
ME

Merge

The same person added twice, once as a phone call and once from a web form, can be merged into a single record.
QB

QuickBooks link

A contact can be linked to the matching QuickBooks customer so invoicing lines up with your accounts.
Deleting a contact hides it rather than destroying it. Removal is a soft delete, so a contact taken off the book does not take the history of their jobs with it.

Business Relationships

Level 70+
Manages every outside party you work with, not just subcontractors: suppliers, insurance companies, property managers, referral sources and experts each get their own record. A master-detail layout lists them on the left with compliance status badges. The detail tabs on the right vary by relationship type, and always include Profile, Contacts and Integrations. Subcontractors and experts add Compliance (W-9 and COI tracking with expiration warnings) and Invoices / AP (bills, outstanding amounts, payment tracking); subcontractors also get Work Orders, suppliers get Purchase Orders, and property managers get Properties and Work Order Intake. Vendors with portal access log in at permission level 0 and see only their assigned projects and tasks.
Find it:Advanced Tools → Managers → Business Relationships
COI tracking: Certificate of Insurance status is tracked as On File, Expiring Soon (amber warning), or Expired (red block). Turning on "W9 and insurance required for bill approval" on a subcontractor blocks approving their bills until a W-9 and an unexpired COI are on file.

Price List Manager

Level 50+
Manage reusable price lists that feed the Scope/Invoice tab, Cortex Dry billing, and Cortex Estimate. Each price list contains line items with descriptions, units (SF, LF, EA, HR, etc.), and prices. Maintain multiple lists, one per insurance carrier or region. Import price data from an Xactimate price list file or build lists manually. Cortex Dry uses price list rates to calculate equipment billing automatically.
Find it:Advanced Tools → Config → Price Lists
The first video covers building a list and keeping it current, and is the one to watch if you only watch one. The second is the Xactimate import path, which is what you need if your prices arrive as a file rather than being typed in.

Equipment Manager

Level 50+ · Requires the Equipment Manager module
Two kinds of record, and the difference matters. A model is a kind of machine, an Air-Max by Phoenix. An inventory item is one actual unit of it, with its own serial number, status and office. Build the models first: the item form asks you to pick a model, and until one exists there is nothing to pick.
Find it:Advanced Tools → Managers → Equipment Manager
MO

Models

Name, manufacturer, category, value, specifications, image and notes. One record per kind of machine you own.
IN

Inventory

One record per unit. Serial number, item number, status, office, facility, purchase date and warranty expiry.
BL

Billing Line Item

On the model. A price list and an item from it, used when the equipment is deployed. Read the warning below before skipping it.
FL

Flagging

Mark a unit as a problem, then resolve the flag with a note that lands in its service history.
SH

Service history

What has been done to a unit, and when.
UT

Utilization

What is deployed, what is idle, and a status breakdown across the fleet.
SC

Barcode scanning

Scan serial numbers straight into inventory with the camera. Easier on a phone than typing them.
CS

CSV import

Bring in models or inventory in bulk, with a preview before anything saves.
The billing chain, and the step most often missed. Four things have to be true before deployed equipment turns into money: a price list holding equipment day items, a model, a Billing Line Item on that model with both the price list and the item set, and the inventory item linked to that model. Break any one and Cortex Dry pushes the scope without that unit. It does not warn you and it does not stop: the unit simply is not there, and the reason sits in the skip list where it is easy to walk past.
Researching a model uses Cortex Coins. Cortex can look up a model and fill in its specifications and a product image. It costs a coin, but only when it comes back with something. If it finds nothing you are not charged, and running it again on the same model is always free.
Requires: A price list carrying equipment day items, built first at Advanced Tools → Config → Price Lists.

Vehicle Manager

All Staff
One record per vehicle, and it is the list the rest of the platform treats as your fleet. Each record carries the identity of the truck, who normally drives it, which office it lives at, its service history and any open issues raised against it.
Find it:Advanced Tools → Managers → Vehicle Manager
VE

Vehicle record

Name and nickname, year, make, model, plate, color, VIN, registration expiry, type, status, home office, primary driver, capacity and notes.
SR

Service records

Date, what was done, odometer, cost, vendor, and a receipt or invoice.
SI

Service issues

Problems raised against a vehicle, tracked open or resolved, closed with a note on what was done.
CL

Checkout checklist

An optional list a driver works through when taking a vehicle out. Off until you switch it on and write the items.
MD

Maintenance due

A badge on any vehicle with maintenance coming up.
GP

GPS

A badge on any vehicle with a tracking device attached.
Dispatch reads its trucks from here. The vehicles on the Dispatch board are these records. An empty fleet means an empty resource list, and nothing on the Dispatch board explains why.
No permission gate. Unlike Equipment Manager beside it, this page has no permission floor. Anyone who can open Advanced Tools can add, edit and delete vehicles.
Already on video. The My Day walkthrough in Part 2 covers Vehicle Manager as well.
Requires: GPS tracking is connected separately, in Account → Tools → Vehicle Tracking (GPS), at level 80.

Maintenance

All Staff · Requires the Maintenance module, which is off by default
A register of the physical things your company owns and a preventive maintenance schedule for looking after them. Anything counts as an asset: a vehicle, a building, a truck bed, a storage container, a dehumidifier, a fire extinguisher. Attach a recurring schedule and Cortex reminds you when each one is due, then keeps a permanent record of the work once it is done.
Find it:Advanced Tools → Managers → Maintenance
DU

Due

Everything at or past its reminder date, across every asset, as a single to-do list. This is the tab to open on a Monday morning.
AS

Assets

The register itself. Each asset takes a name, a status of Active or Inactive, an identifier such as a VIN, serial, plate or unit number, a location, and free notes.
NE

Contained in

An asset can sit inside another one, so an extinguisher belongs to a truck and the truck belongs to a yard. The register nests rather than sprawling.
SC

Schedules

Attached to an asset and recurring on a time interval. When one comes due it is notified by the daily check and appears in Due.
HI

History

Completing a scheduled job appends to that asset's permanent service history, so the record of what was done and when outlives whoever did it.
This is deliberately broader than Equipment Manager. Equipment Manager tracks the drying gear you deploy to jobs and bill for. Maintenance tracks anything you own and have to look after, billable or not. A dehumidifier can reasonably appear in both, for different reasons.
Requires: The Maintenance module, which ships switched off. An owner or admin turns it on at Settings → Access & Features → Module Control.

Personal Settings

All Staff · Level 80+ to set the company default for project cards
These are the settings each person keeps for themselves rather than for the company: how the app looks, what their dashboard shows, and their own contact and notification details. Changing any of them affects only the person who changed it, with one exception covered in the notes below.
Find it:Advanced Tools → Config → My Profile · themes also live at Settings → Appearance → Theme
T

Theme

Five color themes: Obsidian, Daylight, Midnight, Slate and Ember. Daylight is the one a new account starts on. Pick one directly from the swatches in Settings → Appearance → Theme, or step through them with the theme button on the left rail.
D

Dashboard

Under My Profile → Dashboard you can hide the row of KPI tiles across the top of your dashboard, and you can override the company layout of the project cards with one of your own.
P

My Profile

Your own details, across tabs for Identity, Meet-the-tech, Communications, Availability, Behavior, Dashboard and Diagnostics. This is where you fix your own phone number, decide how you want to be notified, and set the intro a customer sees before you arrive.
There are five themes, and the rail button walks through all of them. The button steps to the next theme in order and wraps back to the start, so pressing it repeatedly cycles the whole set rather than flipping between two. Hovering it names the theme you are currently on. To jump straight to a particular one, use the swatches in Settings → Appearance → Theme instead of pressing the button five times.
The Advanced Tools tile is labeled misleadingly. In Advanced Tools → Config the theme tile reads Dark Mode or Light Mode depending on where you are, which suggests a two way switch. It calls the same stepping action as the rail button, so it advances to the next theme in the list and will often not take you to the mode its label promises. The swatch picker is the reliable route.
Your theme follows you, not your company. The choice is saved against your staff record as well as the browser, so signing in on a different device brings it with you. Nobody else is affected, and an administrator cannot set it on your behalf.
The Dashboard tab in Settings is a company default, and it is about project cards. Settings → Appearance → Dashboard sets the default layout of the project cards for the whole company. It does not lay out the dashboard page. Each person can then override it under My Profile → Dashboard, and anyone who has not overridden it follows the company default, so changing it moves the ground under everyone who has left theirs alone. That tab needs level 80; the personal override needs nothing.

API & Integrations

Level 80+
Two-tab panel for external connectivity. API Keys tab: Generate, view, and revoke API keys for the JobDox Open API. Each key has a name and configurable scopes (projects:read, projects:write, contacts:read, etc.). Key value is shown once on creation, so store it securely. Keys are rate-limited to 60 requests per minute. Apps tab: Browse and connect third-party integrations including webhook and Zapier connections. Outbound webhooks can be registered to trigger on platform events and are auto-disabled after 10 consecutive failures.
Find it:Advanced Tools → Config → Account → Developer & Admin → API & Integrations

Billing & Subscription Management

Level 80+
View your current subscription plan, Cortex Coins usage stats, and Stripe payment history. The "Manage Subscription" button opens the Stripe customer portal for updating payment methods or canceling. A warning banner appears if the last payment failed. Upgrading your Cortex Coins plan is done through the "Upgrade" button which initiates a Stripe checkout.
Find it:Advanced Tools → Config → Account → Billing & Plan → Subscription & Invoices

Time Off & Calendar

All Staff to submit · Level 70+ to approve or deny
Staff submit time off requests with dates and reason. Managers view pending requests and approve or deny them. A calendar view shows upcoming time off across the team. Time off integrates with My Day and the Dispatch board so managers see who is unavailable when scheduling work. Tracks PTO balances and accruals.
Find it:Advanced Tools → Workspace → Time Off & Calendar
Part 8

External Access & Resources

Tools for users working outside the main portal, including field technicians, homeowners, and new team members getting up to speed.

Cortex Mobile App

Field Technicians · all permission levels
The Cortex app for iOS and Android puts the full platform in your pocket on the job site: clock in/out, photo capture, daily notes, tasks, and drying readings. It works offline and syncs when connectivity returns. Calls and texts to customers go out from your company number, not your personal phone. Everything is live and shared with the portal.
Find it:Download from the App Store or Google Play at jobdox.ai/download

Customer Portal, Homeowner View

Homeowners / Clients (external users)
A public-facing portal where clients can view the status of their restoration project. Authenticated by matching the viewer's email to a project contact. Shows project status, client-visible daily notes (only notes with the "visible to client" flag enabled), project photos, and document signing status. Does not show internal notes, financial data, or any staff-only information.
Find it:Enable per-project via: Overview tab → Client Portal toggle, then share the link with your client
Requires: At least one project contact with a valid email address entered in the Contacts tab, and at least one daily note marked "visible to client" in the Overview tab.

JobDox University

All Users
A training and resource hub with tutorial content, guides, and video walkthroughs for using platform features. Accessible from the in-app help menu at the bottom of the left rail for quick access during onboarding or when learning a new feature.
Find it:Left rail → Help menu → JobDox University, or jobdox.ai/app/university

Permission Level Quick Reference

Admin Reference
LevelRole LabelKey CapabilitiesCannot Access
100AdminEverything, including editing roles and permission requirementsNone
90DirectorPay-rate editing, staff management, all reportsEditing roles
80Sr. ManagerSettings, Account, billing, API keys, offices, payroll viewEditing pay rates or roles
70ManagerScope/Invoice, billing rates, Business Relationships, approving time offSettings, Account, payroll
60Project LeadAll projects, Budget, Reports, Financial Dashboard, Shift Reports without ratesBilling rates, Settings, payroll
50CoordinatorAll projects, creating projects, Budget, Reports, price listsBilling rates, Settings, payroll
40Senior TechTheir office's projects, Project ReportBudget, Scope/Invoice, Settings
30TechnicianTheir office's projects, tasks on projects they can openBudget, Scope/Invoice, Project Report, Settings
20Field IIAssigned projects, Cortex Dry, Cortex InventoryOther offices' projects, Budget, Settings
10Field IAssigned projects onlyCortex Dry editing, Budget, Settings
0VendorMy Day with personally assigned tasks onlyPortfolio, project details, all internal data

You Know Cortex

You've reviewed every section of the platform. Share this guide with your team or bookmark it for reference. For live support, visit jobdox.ai/support or reach your onboarding representative directly.

Setup Complete
Portfolio & Daily Ops
Project Management
Cortex Dry & Cortex Inventory
Reports & Finance
AI Features
Vendors & Admin
Field & Customer Access